Vident iLink400 OBD2 scanner comes with no any car software when arriving to the users, it is supposed to download by yourself, you can add at least 5-car software as you will.
More software can be added anytime at extra cost. You can contact the authorized dealer to buy extra software (60 usd per software with serial number).
How to download software to Vident iLink400 scanner?
iLink400 software license (Pay for the license and provide us S/N to activate authorization)
A Windows PC/Laptop
A TF Card Reader
Method 1: from the CD
Method 2: from the official site
Step 1: Install the Update Client
1). Browse official website http://www.videnttech.com/support/ to download the update client.
2). Open the zip file downloaded above. Run the installer inside it.
Alternatively, you can install the update client from the CD that comes in the product package.
Step 2: Create Your Vident Account.
Firstly you need to create an account with Vident.
1). Once installed, launch the iScanzilla software, click on the “Register” button.
2). Fill out the registration form and submit.
Alternatively, you can click on “Sign Up” button on the right upper side of the official site to create an user account.
Step 3: Register Vident iLink400
1). When logged in iScanzilla, click on the ‘Register Products’ icon.
2). On the ‘S/N Registration’ tab, tick off ‘001’ then enter the product’s serial number & password, and click Submit.
Please connect Vident iLink400 scan tool with computer through the USB cable, select Setup > About to check the Serial Number and ‘Register Password”.
3). A confirmation box should be shown confirming successful registration.
Alternatively, you can register Vident iLink400 in the member center when logged in on the official site.
Step 4: Download the Car Software
1). Now close the iScanzilla software, remove the TF card from iLink 400 (making sure the tool is turned off first!) and connect it to the PC via an TF card reader.
2). Once Windows has detected the TF card, run the iScanzilla software and login again. click the ‘My Updates’ button. After a few seconds, a list of the available software updates will appear.
Ensure that the correct serial number is displayed in the drop-down list.
3). Click the Update button to download and install available updates.
Please note: Once the update has completed, don’t forget to ‘safely remove’ the SD card in Windows before unplugging it, to avoid the possibility of data corruption.
Printing Data of Vident iLink400
It’s very easy to print out the test result through iScanzilla.
- Click the Button located on the upper side of iScanzilla. You can enter the print screen without logging in iScanzilla.
- All data saved/stored in the TF card would appear on screen.
- Tick a piece of data to either review it or print it out.